Modded Mustang Forums banner
Cancel
Create thread New Garage Forums

X3Z Computer

Jump to Latest
1 - 15 of 15 Posts
R

rasalibre

· Registered
Joined
·
216 Posts
Discussion starter · #1 ·
ive been doing research and i cant figure out if the A9P / A9L harness is the same for the X3Z (93 Cobra) computer... anyone know for sure? Also i need the Harness its for my 1988 LX conversion if you have one laying around and its in good working shape let me know :D
 
#5 · (Edited)
rasalibre said:
bump
Click to expand...
you dont need a whole harness you can change yours to mass air pretty easy

Summit sells the MAF pigtail , you can google and find instructions I think on corral or allfordmustang forums and find the pins to trade places in the ECM harness and where to hook the 4 wires to the MAF up at .......its pretty simple , takes about an hour or less to do ....and by the way the A9L is the computer of choice regardless
 
Discussion starter · #6 ·
2002BLGT said:
you dont need a whole harness you can change yours to mass air pretty easy

Summit sells the MAF pigtail , you can google and find instructions I think on corral or allfordmustang forums and find the pins to trade places in the ECM harness and where to hook the 4 wires to the MAF up at .......its pretty simple , takes about an hour or less to do ....and by the way the A9L is the computer of choice regardless
Click to expand...
the car the motor is in now was originally a four cylinder LX Notch back (1988) and the motor came out of 1986 GT Convert. but it was a crate motor, i dont know alot on the history of it... but the convert had the X3Z computer and 24# injectors with MAF on it... the harness in the 1986 convert is way different then the one in the 1988 LX Notch. so yeah i need a harness... anyone selling any?:sorry
 
#7 ·
rasalibre said:
the car the motor is in now was originally a four cylinder LX Notch back (1988) and the motor came out of 1986 GT Convert. but it was a crate motor, i dont know alot on the history of it... but the convert had the X3Z computer and 24# injectors with MAF on it... the harness in the 1986 convert is way different then the one in the 1988 LX Notch. so yeah i need a harness... anyone selling any?:sorry
Click to expand...
Just sold a whole setup on ebay , check there , if you dont see one , call the guys down at mpsautosalvage.com they usually will have pretty much anything you will need , another place that does keep stuff like that is Delkperformance.com
 
#9 ·
I should have one if you still need it $175 let me know and I will check the year for you but I think it is a 89 I also have a Cobra ECM if you need that $150 for it also. you can check the classified on stang net I got good feed back and you can check on E-Bay also under the name of WVstangracer I have good feed back there also.
 
Discussion starter · #10 ·
uedlose said:
I should have one if you still need it $175 let me know and I will check the year for you but I think it is a 89 I also have a Cobra ECM if you need that $150 for it also. you can check the classified on stang net I got good feed back and you can check on E-Bay also under the name of WVstangracer I have good feed back there also.
Click to expand...

i just need the harness but 175 seems high, is that with the computer to? and im not sure if 89 will connect up and work proper... i know on 90 the head lamps wont turn on, on a 89 88 87 ect..
 
1 - 15 of 15 Posts
About this Discussion
14 Replies
4 Participants
Last post:
rasalibre
Modded Mustang Forums
posts
6.3M
members
83K
Since
2005
A forum community dedicated to all Ford Mustang owners and enthusiasts. Come join the discussion about performance, racing, builds, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
96 - 04 Modular Mustangs 5.0 Mustangs New Members Introductions Classic Mustangs