Modded Mustang Forums banner
1 - 20 of 65 Posts

coffinator6

· Registered
Joined
·
984 Posts
Discussion starter · #1 · (Edited)
Well guys its time to sell my stang. Ill be moving in the next month and the car won't fit in the new apartment complex( huge bump right as you enter). That and I found my dream car so this one as to go.

Its a 03 mineral grey GT. 5 speed. has just under 55K miles(53k actualy). Has leather and the Mach 460. The cd changer works great. I know slot if people have problem with tv 6 disk changer. I have never had a problem with this one. It is my daily driver so the mileage will go up a little. the car does have a couple paint ships and scratches. nothing major.

current mods are (thats how i bought it.)
eibach drag springs
bbk ceramic coated long tubes
bbk off road h-pipe
magnaflow catback. (not magnapacks)
C&l upper intake
75mm throtle body( not sure of brand but ill check.)
upper intake spacer
steeda timing adjuster( advanced 4 degrees. thats what steeda reccomends.)
underdrive pullies
optima red top battery
steeda tri ax
full length subframe connecters
17x9 and 10.5 bullitts (the fronts are have some curb rash from the previous owner)
ram aftermarket clutch
upr firewall adjuster and 3 hook quadrent.

also comes with 2 or 3 extra oil filters, microfiber wash cloth and shammy. the wash cloth and shammy have only been used on this car and never on the wheels. I always buy a shammy and wash cloth for each car and they go with that car when its sold. Ill even throw in a mother clay bar kit.

price in the above condition is pay off at $10.5K I just need it gone cause I don't want to park it around the corner and walk in to the appartment complex.

Now here is where the deal comes in.

I currently have a bunch of parts sitting awaiting install.

H&R SS springs
tokico d-spec shocks and struts
MM caster camber plates
steeda x2 ball joints
steeda bump steer
13" big brake kit for the rear.
mach 1 grill delete
MGW shifter (installed 02/16/09)
strut tower brace
6" cowl hood. has a crack in it but can be repaired easily.
cobra side skirts.the 2 front short pieces are brand new from ford. the 2 long ones are used off of a red cobra and need painting.

price with all the parts is $11,000. thats over $1500 worth of parts for $500. Im that motivated to sell. there is NOTHING wrong with the car and runs very well. the only thing i have done to the car is put new plugs in it, changes the trans fluid, oil and filter, and rebuilt the tri ax. While i had the shifter off to fill the trans i just took it apart, cleaned and regreased it.

pics in post #10
 
Discussion starter · #2 · (Edited)
I'll make some one an even better deal(UNDER $11k) if they realy want the car and the parts.

Not willilg to sell the parts by themselves just yet. I'll let the buyer decide he wants the parts first.

Oh and the hood is free to the buyer of the car or parts I they get seperated.
 
Discussion starter · #4 ·
sounds like a great deal man good luck and what is the dream car you found.
thanks. I have always wanted to build a nice blue coupe. well Ill have the wheels I want in a couple months and I just found the perfect coupe to start with. I have had coupes in the past but never one that was in that great of shape. TF wheels on a coupe is going to look sick.

here is a pic of my car for sale. just took it a couple mins ago. she is kinda dirty but ill give her a bath and take some better pics.

oh and ill take $9,700 for the car alone if someone will take it in the next week. Blue book clean retail is $11,270. clean trade in is $9,800.
 
Discussion starter · #5 ·
Well herwe are a couple pics taken a few months ago. Ill have some new ones up in the next day or so. My buddy is going to wash and detail it for me tomorrow.
 
Sucks to see ur getting rid of it looks like someone is goin to get an awesome deal. Are you still goin to make those carbon fiber parts?
 
  • Like
Reactions: PowerShiftz02GT
Discussion starter · #7 ·
Sucks to see ur getting rid of it looks like someone is goin to get an awesome deal. Are you still goin to make those carbon fiber parts?
yup. my buddy is getting a nice 30'x60' shop built in the next couple months so ill have the space to do it.


oh and whoever buys the car with parts ill even have the new springs, shocks/struts, ball joints, and bump steer kit put on and and an alignment done at no extra charge.
 
Discussion starter · #10 ·
here ya go guys/gals. the car just got detailed by my buddies that work at the local big name car dealer. it will also be detailed just before the new owner picks it up. I will also have it full of 91 octane.(91 required cause of the 4 degrees advanced timing.)

the only problems witht he exterior are the couple paint cracks on the hood, scratch on the drivers door handle and the small quarter size ding just above the fuel door.

the interior problema are the shifter bezel has a small scuff mark and the e-brake boot has been removed because it was torn. I just havent gotten around to replace it. I was going to use a cobra one but they are $85. If the new owner wants one installed i can do it if it will make the sale of the car.

oh and I forgot the interior has the interior upgrade package, chrome gauge bezels, and pedal covers.
 
Discussion starter · #11 · (Edited)
more. all pics were taken with my iphone as my camera battery was dead. If someone would like some larger nicer pics just let me know.

oh and if someone wants specific parts installed on the car I can do that. just let me know what you want and make me an offer.

dont forget the MGW shifter is now installed on the car and is f-ing awsome compared to the tri-ax.
 
Discussion starter · #17 · (Edited)
The way it sits what is your bottom dollar? Do you have the title in hand or is it held by a local bank? Thanks.
Title is sitting in my room at home. $9500 is my bottom dollar. I owe $10,500. I just pulled a small loan for another car so this one has to go.

The only thing the car needs is the brake fluid changed. I'll do that free of charge for the new owner. Ill also change the oil and filter right before the new owner picks it up.

The Mach 1 grill delete was installed last night. Made the car look a lot better.
 
1 - 20 of 65 Posts