Modded Mustang Forums banner
1 - 9 of 9 Posts

mystang0673

· Registered
Joined
·
3,453 Posts
Discussion starter · #1 ·
do any of you guys have pics of your stock motor mounts installed on your motor... I have 3 studs and 3 bolts. i know that the side where there are 2 bolts, the top one is a bolt and the bottom is a stud. that leaves 1 bolt and 1 stud. i am trying to figure out which side the stud goes on "drivers or passenger". the haynes manual doesnt show any detailed pics so i cant figure it out. thanks
 
Discussion starter · #3 ·
i tried to look... the starter ground and all bolts up to the front stud of the passenger side, and there is a ground strap that bolts to the front of the mount on the passenger side. both of which i KNOW studs go there... lol. i couldnt find any strap or anything that bolts to the back of the mounts... for some reason i thought i remembered something actually bolted to the motor after i got it out. i know it wasnt a dipstick tube but it was something like that.
 
i tried to look... the starter ground and all bolts up to the front stud of the passenger side, and there is a ground strap that bolts to the front of the mount on the passenger side. both of which i KNOW studs go there... lol. i couldnt find any strap or anything that bolts to the back of the mounts... for some reason i thought i remembered something actually bolted to the motor after i got it out. i know it wasnt a dipstick tube but it was something like that.
ground goes to the back stud on the pass side, trans cooler lines to the front stud on the pass side, don't remember the drivers side off the top of my head.
 
there is a ground on the driver side too i believe that grounds to the frame if i remember correctly.
 
Discussion starter · #6 ·
1 - 9 of 9 Posts