i have a 2002 mustang gt and these are the mods i have right now on the car....bbk cai....CnL ported plenum....ford racing TB....bassani ORXP....40 series flow masters dumped and a 93 octane tune....im running my stock manifold right now because my car has ben dropped allmost 2 inches and im afraid i would not have good ground clearance with LT headers. With the modds i have right now and a set of aftermarket cams get me to the 300 rwhp mark and what is a good set of cams yall would recomend?
cam hp quistion?
shelton gt 500
21 - 34 of 34 Posts
Joined
·
1,989 Posts
Like I said before. Just buy a blower and have 100 more hp. By the time you buy cams, springs, and a nitrious kit you might as well have bought a blower
I would take the opinion of the guys that have cams and have done it and tell you not to over someone that doesn't and tells you to do it. That's just me.
I would take the opinion of the guys that have cams and have done it and tell you not to over someone that doesn't and tells you to do it. That's just me.
Joined
·
3,430 Posts
Amen to that man...
But I still love my cams... no matter what I WISH I did. Ended up buying a blower anyways... haha
Joined
·
697 Posts
I make 268 and 310 now. I'm sure my Headers helped out aloot. I too want to have 300whp. I would be happy with that number for a while.
Joined
·
7,243 Posts
don't think you'll gain 12rhwp but you would def. be in the 290's or close to 300.
we should race if your ever in upstate sc
...really, haha we have pretty much the same mods...except i have no longtubes and i have hitech cams.the comps do sound good...but i love the sound of mine.
and will definitely say that its gonna be awesome to have cams with the blower. i love the lope. i mean if i could choose, i would pick the blower. but now that i'm gonna have a blower anyway, its gonna be sweet to have a lope with it
Joined
·
3,430 Posts
I mean that 288 is w/out my o/r H and w/out the 78mm T/B/Plenum. That+ UDPS, would def be approaching 300 rwhp.don't think you'll gain 12rhwp but you would def. be in the 290's or close to 300.
we should race if your ever in upstate sc
the comps do sound good...but i love the sound of mine.
and will definitely say that its gonna be awesome to have cams with the blower. i love the lope. i mean if i could choose, i would pick the blower. but now that i'm gonna have a blower anyway, its gonna be sweet to have a lope with it
you should come up to the 1/8 mile some time and run me. right up 85 in morrosville. However, looking at those big ass tires on your car... you will beat me on traction alone haha. I cant get under 2.2 60'. (however, I do not have much practice, I just started
)
Joined
·
697 Posts
You ever make it to Farmington or Shady side? and just curios what do you normally run? I hover around 9 flat on most nights.I mean that 288 is w/out my o/r H and w/out the 78mm T/B/Plenum. That+ UDPS, would def be approaching 300 rwhp.
you should come up to the 1/8 mile some time and run me. right up 85 in morrosville. However, looking at those big ass tires on your car... you will beat me on traction alone haha. I cant get under 2.2 60'. (however, I do not have much practice, I just started
Joined
·
311 Posts
i do apreciate all the info guys.....right now i do have full bolt ons minus LT headers.....i am going to go boost later on. I can get my cams...springs...and install done for around 1,000. Im going to have gear heads in arlington tx install them and do the tune.
Joined
·
345 Posts
damn where did all that torque come from...not bad for a 281I got 287/337 from CMS Stage II's on a Superflow Dyno. If I looked hard enough I could find a dyno that got me 300rwhp. I'm sure you could too
21 - 34 of 34 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
