Modded Mustang Forums banner
21 - 40 of 57 Posts
Discussion starter · #24 ·
Car shows in NJ

So even thow my car is not going to be 100% ready i will still attend car shows.... so here is a list of car shows im going to try my hardest to attend. I will add more when i find out other dates.... If you know any other ones please write....

May 7, 2011 (rain date May 14).
Free Car Show At The Bridgewater Library. 1 Vogt Drive, Bridgewater, NJ.
The Bridgewater Library will hold its 7th Annual Car Show on Saturday, Registration and admission are FREE! All makes, models and years are welcome to register. Spectators will be invited to vote for their favorite cars and trophies and prizes will be awarded to the winners. The prize categories are: Best in Show (1st, 2nd & 3rd place), Dream Car (1st, 2nd & 3rd place), Best Exterior, Best Interior and Best Engine. There will be music, food and prizes. To register or to see pictures from last year’s show, go to: Bridgewater Library Car Show-Somerset County Library System-NJ or email Rich Loomis – rloomis@sclsnj.org - 908-526-4016 x171.

May 14, 2011 (rain date May 21, 2011)
PBA Local 165 along with All American Ford of Old Bridge and Classic Nights Car Club,
Car Show, Located at Route 18 Old Bridge, in the All American Ford Car Lot Great Food, Music by Jute Box Jimmy , First 100 Cars receive Dash Plaques, People’s Choice Best of Show Trophy plus 20 other Trophies, $100. For Best Club Participation. Pre Register by May 7,2011 $15.00 Day of Show $20.00 More info at PBA LOCAL 165 MIDDLESEX COUNTY NJ SHERIFF OFFICERS

May 15, 2011 raindate Sunday - May 22, 2011 Registration at 10:30
JP's Steakhouse at Rhythms (formerly The Yellow Rose), Main Street, Manville, NJ
$15.00 registration - all types of cars and motorcycles welcome Vehicles leaving promptly at 11:30 for ride thru scenic horse country to Car/Bike Show at Spinning Wheel Diner, Rt. 22 East, Lebanon, NJ For info call: Ron - 908-482-0008 or Jack - 908-231-1772
 
the conversion didnt cost me 1300, JUNKYARD man, 94/95 mustangs doesnt matter if its a gt or v6 all the same

think i paid 400 for the hardware from junkyard, scraped the rotors got new ones for 100 or so, the calipers i brought to napa and did a core swap those cost me some money, (cant remember how much) then u have to buy some bandroll bolts, 93 cobra e brake cables...(dont have yet)

u will need to upgrade the master cylinder, u will need a brake proportion valve and some other lil things, maximum Motorsports sells them...then i went stainless steel brake hoses (not a must)

probably a good 1,000 dollars
 
So it took me 9hrs total inorder to complete trim. Thats Taped/Sand/primed/painted. Here are some pictures of me preping the car. I will post the results when i take off tape. Im going to let car sit for 3 days with tape on it even thow the can says 48hrs to harden.

Paint trim pictures by stang302stock - Photobucket
Depending on the quality of tape it could prove difficult removing it after too long but one extra day does sound good
 
Discussion starter · #30 ·
Job complete i took off tape just in case it sticks to much and came off with no problem. Here is the outcome. Overall i think it came out great, If i have to do anything diffrent i might sand alittle more because the last owner did a bad job in painting it, but what he did not paint over came out great. The car is still going to sit for 3 days to fully harden, even thow this car does not see rain, I still want it to fully harden before driving.

Paint trim pictures by stang302stock - Photobucket
 
Discussion starter · #36 ·
I just received my Flowmaster American thunder 44 system in and going to install it this week. I will post pictures and video when completed. I will have a pre video and a post video of muffler system.

I’m debating on if and what gauges to put inside. I’m not sure if i want to put any addition gauges until i put new engine in next year, but it is tempting to do know. If you have any ideas as well as pictures of some setups please share....
 
I just received my Flowmaster American thunder 44 system in and going to install it this week. I will post pictures and video when completed. I will have a pre video and a post video of muffler system.

I’m debating on if and what gauges to put inside. I’m not sure if i want to put any addition gauges until i put new engine in next year, but it is tempting to do know. If you have any ideas as well as pictures of some setups please share....
Stang302 – Thanks for your purchase! When you’re done shooting the vide, submit it to Flowmasters Show Us Your Flows contest. We give away prizes every week! You could be a winner next week.


Check out some recent winners:

Brandon Whisler, Dallas, TX


Matthew English, Bellevue, NE

 
21 - 40 of 57 Posts