Misfire p0301

Cabikejumper · Nov 4, 2011

Last weekend my intake manifold decided to start leaking. Also started a misfire in Cyl 5. I replaced the spark plug and boot/spring solved the issue for now.

Now I have a p0301 misfire Cyl 1. Is Cyl 1 the closest plug to the pass side bumper?

If so, I replaced the plug and boot/spring. Still misfiring. Any ideas how to solve this. Until I order a manifold next Friday.

I'm seriously about to burn this ****ing car to the ground.

Thanks

Cabikejumper · Nov 5, 2011

Does this seem right?

http://www.google.com/imgres?q=2001...215632718112865768&page=7&tbnh=111&tbnw=165&start=49&ndsp=8&ved=1t:429,r:4,s:49

MATT02GT · Nov 5, 2011

Yea it should be the front cylinder on the pass side. Pull the coil and make sure you didnt spill any coolant into the plug hole while you were pulling the intake. This happened to me on my f150 and gave me a couple misfires.

Cabikejumper · Nov 6, 2011

I have not pulled the intake off yet.

I checked the number 1 Cyl and was no coolant but replaces the cop boot and new plug. Still misfiring. And the connector the plugs into the cop will not 'clip' maybe the issue? Going to switch cops out and seen of the mis jumps to a different cylinder To single out the bad cop

Misfire p0301

Cabikejumper

Cabikejumper

MATT02GT

Cabikejumper

Top Contributors this Month

Recommended Communities