I thinking about a new rear end. Is there a place on line to where i can have one built like i want it?
Rear end
kreil45
1 - 8 of 8 Posts
Joined
·
3,188 Posts
Hey dick...know of any resonable places in omaha council bluffs area... i have a set of 4.10 and install kit sittin around waiting to be installed for about a year now
Joined
·
13,422 Posts
Since we are on topic and I am Clueless to rear ends. If I bought a 31 spline of AM or the like. I just swap the 4.10's and 31 spline axles right?
Joined
·
1,456 Posts
No, you will need a 31 spline differential. Factory diffs are 28.
Beamed from my Nexus
Joined
·
13,422 Posts
I ment 31 spline diff from AM...
To answer the OP's question ...
Yes, Moser, Strange, Currie all will put together a full rear end for you.
I just had a 9-inch built for me by Strange.
I specified the internals and that I wanted it to be a direct bolt in for a 2004 Mustang GT.
The new rear bolted right in, but it moved my tires inward about an inch, causing me to have to trim my inner fender wells, and bend the tailpipes a little bit for clearance. I'll be getting some 15 X 10 inch wheels and bigger tires to fill in the fender wells a little bit better.
Yes, Moser, Strange, Currie all will put together a full rear end for you.
I just had a 9-inch built for me by Strange.
I specified the internals and that I wanted it to be a direct bolt in for a 2004 Mustang GT.
The new rear bolted right in, but it moved my tires inward about an inch, causing me to have to trim my inner fender wells, and bend the tailpipes a little bit for clearance. I'll be getting some 15 X 10 inch wheels and bigger tires to fill in the fender wells a little bit better.
1 - 8 of 8 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
