yea but it will take a bit of money...

long tubes with mufflers that are turn down dumps... uh better cam and all the things that go with it and yea...

 

I'm willing to shell out some. What all would I need?

 

well you will need a port and polish to get more flow better cam shaft with an aggresive lift and lobe... better valve springs and such... a better fuel system with better injectors a better coil pack with good plugs and then the exhaust of your choice... maybe long tube headers and custom fabbed from their back with what ever muffler you want

all in all ... it might be round 1500-2000 dollars for all that but you will be sitting with a damn good mustang with plenty of room for improvment

 

okay, sounds good. do you know of any websites where I can browse for these parts? also, do you recommend any brands? thanks dude.

 

MAC is gonna be a good source of exhaust parts...

Supersixmotorsports will be a good place for machining and cams...

you can talk to them and see what they say... i would acctually ask them the same question you posted here and tell them that you had a few things in mind and list what i said and see what they say...

screamin demon is a coil pack that will work... walbro fuel pump... maybe a 190 or something ... and you might be able to talk to someone on here about injectors... maybe a 28 or 32 lb... or 24 might do... im not sure... so yea ask SSMS about what i said and see what they have to say

what year car do you have?

 

it's a 2000 V6 automatic.

 

yea i was wanting the same thing for my 06 v6 but i cant really shell out 1500 to 2k but the one im looking at is a true dual with an h-pipe an then ill get a gt bumper to finish the look also i might look towards a cam later on but if i do that would that mean that i would have to get bigger injectors and a new ignition system and all that?

 

well not neccesarily... you could run stock componenets with an upgraded cam... but it would be pointless and the stockers could only support it up to a certain point... you might be able to pull it off tho im not sure

 

well you will need a port and polish to get more flow better cam shaft with an aggresive lift and lobe... better valve springs and such... a better fuel system with better injectors a better coil pack with good plugs and then the exhaust of your choice... maybe long tube headers and custom fabbed from their back with what ever muffler you want

all in all ... it might be round 1500-2000 dollars for all that but you will be sitting with a damn good mustang with plenty of room for improvment

Erra: Better fuel system better injectors better coil pack good plugs - Negative

If all he's going for is a "GT ish sound" which btw you wont ever get... You can do.

Long Tubes + Cold Air + Cam + _insert mid pipe_ = sound

 

If all you want is the sounds buy a gt. With all the money you will be spending to get it close you could afford one, and put exhaust and a cam in the GT to make it even meaner. Plus with the V6 it will never sound like an 8 since we have an even firing motor.

 

you cant make your car sound like a GT unless you drop a GT motor into your car BUT you can make a v6 sound good.. h-pipe of your choice and dual flow master or MAC mufflers and your stang will sound better than a stock GT imo..

longtube headers + h-pipe + MAC or Flows = Better sound than cat-back GTs