anyoneee?...

 

Does your radio have 2 holes on each side of the radio?
If so you can buy the u shape keys from ford, or you can try to make some with a coat hanger. Put them in the holes, squeeze them to together a little, and pull...

Not sure about 06, but 1999-04 the center molding is clipped together. So just lift and it should unclip.. BUT THIS IS ON 99-04, NOT SURE ON 06...

Jason

 

1) open up armrest
2) remove 2-4 screws located on top of bezel under armrest
3) pull ebrake all the way up
4) if automatic, remove square trim ring around shifter
5) pull up on center console bezel
6) pull off side panels next to radio
7) unplug accessories from bezel
8) remove 4 screws around radio
9) remove radio

that is pretty much it right there.

 

thank you wrath...always a great help..

WHere would you recomend i mount the integration unit/box and how?

 

id have to see what you are getting to give you ideas

 

 

Im not sure if you have an opening in the compartment like I do, but there is a little rectangle cover that pops out that you can run the wires through if you want your ipod the stay in there, so no drilling, but im sure you knew that.

 

yeahh i knew that but how will i keep the wires away from moving parts like the e-brake and other stuff? and also where do i mount the converting box thing?