Best hp for my buck?

Tonifreakshow · Jan 17, 2012

I LUUUUUUUUUUUUUUUUV Flowmasters! They can make a fart sound good.

69fastback · Jan 18, 2012

Flowmasters = The gayest thing to happen to a Mustang

bennyjet846 · Jan 18, 2012

bigjohnstud4200 said:
Are you running equal length shorties? Are they chrome?

they're regular shorties, chrome. i had the option of getting chrome or ceramic. the ceramics were literally 100 bucks more so i took the chrome ofcourse. the guy said the only difference between the 2 is that ceramic coated shorties doesn't rust.

FastStang91Lx · Jan 18, 2012

Not the only difference. Ceramics hold the heat in better for exhaust scavenging too.

bennyjet846 · Jan 18, 2012

everyone nowadays have flowmasters on their mustangs. i admit it sounds nice but everyone has them. i got magnaflow, sounds exactly like stock mufflers.

bennyjet846 · Jan 18, 2012

FastStang91Lx said:
Not the only difference. Ceramics hold the heat in better for exhaust scavenging too.

damn, the speed shop misinformed me then. i was browsing through the web and i saw this header wrap, supposed to keep heat out from the engine bay and i guess if u think about it, it may work like a ceramic coating. waht do u guys think? or a gimmick?

FastStang91Lx · Jan 18, 2012

Heat wrap is real working thing, just be prepared to have your headers rust out.... from what I hear.

bigjohnstud4200 · Jan 18, 2012

FastStang91Lx said:
Heat wrap is real working thing, just be prepared to have your headers rust out.... from what I hear.

Are you saying they will rust out due to moisture in the heat wrap, because they are chrome and not ceramic or a combo of both?

FastStang91Lx · Jan 18, 2012

Just because of the heat wrap. I don't think it has anything to do with the chrome or ceramic coating on the headers. Again, from what I heard, never personally wrapped any headers before.

ryanw · Jan 18, 2012

For a 100 bucks more i would have gone with the ceramics

StangBanger302 · Jan 18, 2012

Got my used longtubes and h-pipe for 150$...Can't beat that. All I did was sand and paint. Sure they're rusting now...plus some rot, but it was cheap and easy. Next set I'm gonna get some jet hot or something similar. Maybe even bake em on the BBQ.

bennyjet846 · Jan 18, 2012

ryanw said:
For a 100 bucks more i would have gone with the ceramics

if i had to do it all over again i would've went with the longtube headers lol.

ryanw · Jan 18, 2012

StangBanger302 said:
Got my used longtubes and h-pipe for 150$...Can't beat that. All I did was sand and paint. Sure they're rusting now...plus some rot, but it was cheap and easy. Next set I'm gonna get some jet hot or something similar. Maybe even bake em on the BBQ.

That spray on, ceramic paint that you bake on......doest f-ing work...lol

I followed the directions, baked at 250 for 30 min, let cool for 30 min bake again at 450, for 30,let cool for 30. Ect ... ect... i guess the only thing i did wrong was the last baking called for a temp higher then what my oven went to...i think it was like 650, and i dont think my oven went past 550-575... cant remember now, but with in a few hours a few areas the paint flaked......im just telling you this so you dont waste your time

Best hp for my buck?

Tonifreakshow

69fastback

bennyjet846

FastStang91Lx

bennyjet846

bennyjet846

FastStang91Lx

bigjohnstud4200

FastStang91Lx

ryanw

StangBanger302

bennyjet846

ryanw

Top Contributors this Month

Recommended Communities