Modded Mustang Forums banner
6,301 - 6,320 of 7,059 Posts
I'll end up leaving it black for 2 years. Left the horribly cracked and gashed stock bumper on my car all the way from 2010 until yesterday.
 
Ongoing saga of the front suspension-

Passenger knuckle I bored 2/3 of the stud out with a carbide burr. Hit it with a torch and then freezing spray again. Still doesn't budge. Going to wave the white flag and either get a junkyard one or drop it off at a shop to have them drill the rest out.

Meanwhile I decide to go ahead with the other one. Mock it up, and there's not enough spacer with it. I go to take it off, and now the brand new one is seized to the stud, despite anti-seizing the ever loving **** out of it. :computer:
 
^I would have sold that car and moved on to better things in life at this point if I were you.
 
I had a busy weekend. New shift knob from AM and paintef the gears black. Saturday I did my retrofits. Light output was amazing. Dont use smoked lenses. It sucks. Today I did tailight tint. 3 coats of nite shade and about 8 coats of clear. Did tails and my thrid brake light on my termi spoiler. Everything came out great.

Next weekend taking shorties off and replacing with long tubes. Weekend after that will be redo retrofits in new clear housings.

Pics uploaded are of the shft knob. The tails during the wet sand and polish. And low beam and high beam hids at 25 foot. Camera does not do it justice. Also a pic of the projector mounted in the reflector bowl
 

Attachments

Well I was putting in my switch back turn signals in my 2010 gt but apparently I have different color wiring on each turn signal..... Go figure
 
Like I said, my cousin had the Bosch ones in his car and they seemed fine. He had long tubes as well and never had an issue at all. I think you get mixed reviews on any product. If you want, goto Rock Auto, they have prices a lot cheaper there..

RockAuto Parts Catalog
» Ford, 2000, Mustang, 4.6L, Emissions, Oxygen Sensor

Follow that directly and you'll see they have all that they carry listed there. Motorcraft there is only 41.79 for the Upstream Fronts. So it's a lot cheaper.
 
just changed the oil in mine just yesterday and hopefully I can borrow my friends garage for an hour or two to drain the tranny fluid and change that. Still waiting to put my sequential taillights in though kinda wanna do that on a nice warm day and enjoy the weather while im doing the install, sounds kinda gay I know but it feels good to me to do things like that during a nice day
 
6,301 - 6,320 of 7,059 Posts