-Turn car keys to power up but not start the car.
-Wait till the seatbelt light goes out (about 8-10 seconds)
-Put the seat belt buckle on and off 3 times
-Turn your park lights on once
-Put your buckle on and off 7-10 times till the seatbelt light flashes rapidly
-Once the seatbelt light stops flashing
-Put the seatbelt on
-Start up your vehicle

 

do you turn the parking lights right off or leave them on?

 

Yeah he aint bull shitting ya either on this. When I got my car new it done that ****. It took me an hour to find it in the owners manual and another 30 mins or so to get the combination of the dick dance down right to turn it off. But yeah I remember doing that on.... off, on.... off...... buckle.... unbuckle.... lights on.... lights off bullshit LOL.

 

I tried it but it didnt work. I guess Ill keep tryin it. From what Im told its linked to the airbag so I wanna get it taken care of right. Worst case scenario, I take it to the ford dealership....

 

You can just unplug the connector under the seat too.

 

How do you disable the chime of the door open with the key in the ignition? it's annoying as hell when you're cleaning it and want to listen to the radio...

 

Turn the volume up!

 

maybe his plug is already disconnected, that's why he can't program it off.

 

I just wonder who came up with these riddles, haha. Oh well, so long as it works I guess.

 

Yea so, I cut the wires to twist them together to see if that shut it up, and before I een twisted them together it stopped. Guess its fixed... Thanks for the help.

 

worked for me

my light stays on but it does not ding anymore so im happy

 

this seat belt dance a permanent fix or u gotta do it everytime u drive the car. my car is going over to 4 pt harnesses so i wanna get rid of that stupid chime.

 

I installed racing seats/5 pt. harnesses on my 06 GT and the chime stopped when I unplugged the stock seats for the swap. The seatbelt unbuckled Icon will still show on the dash but I dont care about that.

 

im gonna have to try this to see if it works. cool!

 

definately not a permanent fix, diabeetus, what wire did you cut to make that damn thing shut up>?

 

def interested in how to disable the no seatbelt chime. i made a topic asking the same question once and everybody just told me to use the seatbelt.

 

Did this on my 02 Mustang and it worked perfectly the first time.

Step 1: Turn ignition switch to ON. All the way forward without cranking the engine.
Step 2: Wait until the seatbelt alarm to go off and stop. About 1-2 min.

-- Steps 3-5 must be completed within 60 seconds or the process with have to be repeated.

Step 3: Buckle then unbuckle the safety belt three times, ending with the belt unbuckled.
Step 4: Turn the headlights on then off.
Step 5: Buckle then unbuckle the belt three times ending with the belt unbuckled.
--After step 5 the safety light will be turned on for about three seconds then go off.
Step 6: Within seven seconds of the safety belt light going off buckle then unbuckle the belt again.
--That should disable the safety alarm if it is currently activated or vice versa. You will see the seat belt light blink a few times to confirm it has been done successfully.

Good Luck. I did it on my first try and no you don't have to do it every time. It will disable the chime until you want to reactivate the seat belt warning.

 

I did it this way and have not had the chime come back since(1 monthish)

 

I tried it on a 2007 GT with no luck.

 

Tried both of those methods a few times and the little seat belt light did exactly what you guys said it would.....but I still get the chime the next time I turn the key on without the belt buckled.

 

Stop Your Seatbelt Alarm In 5 Seconds!

Finally there is a quick, easy solution to these **** seat belt alarms! Go to
seatbeltalarmstop. They have two items that will stop the alarm almost insantly. You'll love it!

 

Finally there is a quick, easy solution to these **** seat belt alarms! Go to
seatbeltalarmstop. They have two items that will stop the alarm almost insantly. You'll love it!

Or, instead of buying your $20 product, a free fix, by the experts here.
:fu

Is there a rule against advertising?

 

I don't understand why you guys don't just unplug the connector (its under the seat). It takes 2 seconds and works great.

 

THIS.
Seriously...

Ooops...didnt know this was such an old post lol

 

Interesting I might have to do this. I am tired of that stupid dinger noise.

 

all i did was unplug the connector under the seat! no chime and dash light isnt on either. havent had a problem since

 

awsome..... always hated that annoying chime....."its like yeah i know your not gonna wear your seat belt, but ding ding ding ding ding" what about the doors anyone?

 

To disable the seat belt unfastened chime (Beltminder) in the 2005-2009 it's different.

- Turn car "on" (far as it goes before starting engine).
- Wait for the "fasten seatbelt" light to turn off (about 1 minute).
- Within 50 seconds: Buckle and unbuckle 9 times ending unbuckled.
- The "front airbag" light will light for a few seconds.
- After "front airbag" light turns off: buckle and unbuckle 1 time.
- The "front airbag" will blink a lot signaling it's been either deactivated or deactivated.

* Both driver and passenger sears must be done separately.
* If the seat you are not working on is buckled it will not work.

 

I know this is an old post but I just now read it because I googled how to turn the chime off and I got this forum. I'm curious to know how to reactivate it in case I would fall and bump my head and want to reactivate it again...lol

 

Do the same thing. It basically toggles between it being activated or deactivated.

 

Good to know, thanks