Modded Mustang Forums banner
Cancel
Create thread New Garage Forums

What Did You Do To Your Sixxer Today?

23 reading
Jump to Latest
Status
Not open for further replies.
14,401 - 14,420 of 19,030 Posts
#14,401 ·
Okay so jmod does the same exact thing, except now all i can do is mail it to him and he will drill the holes, but shift kits change springs and ****...so my question is, i have the b&m hammer shifter i bought it so i can drive manually when i feel like it, i want it to shift way faster than it does now, and id want hard shifts at full throttle when its just in D, so will the jmod do all that?
 
Save
Like Like
#14,402 ·
2000 Mustang "Pegasus" said:
Okay so jmod does the same exact thing, except now all i can do is mail it to him and he will drill the holes, but shift kits change springs and ****...so my question is, i have the b&m hammer shifter i bought it so i can drive manually when i feel like it, i want it to shift way faster than it does now, and id want hard shifts at full throttle when its just in D, so will the jmod do all that?
Click to expand...
Short answer, yes. Long answer, Call VAP and tell him what you want the car to do.
 
Save
Like Like
#14,404 ·
I've been doing a bunch of stuff on the G5 lately. I swapped the stock intake for a K&N CAI from a trade-in cobalt that came in.
 
Save
Like Like
#14,406 ·
have the chance to get an mgw shifter for cheap and its from a 95? where the 94-95 a t5 trans? will the shifter work on my car?
 
Save
Like Like
#14,411 ·
dark_horse said:
have the chance to get an mgw shifter for cheap and its from a 95? where the 94-95 a t5 trans? will the shifter work on my car?
Click to expand...
It will work. Only difference is the older ones are Borg Warner, and the new ones are Tremec. Nothing different in the shifter though.
 
Save
Like Like
#14,413 ·
I found out the side scoops i bought were laser pink instead of laser red when i picked them up. Haha. Good thing i have some extra paint. Will get them painted this weeked if my clearcoat comes in. Probably wont though. Also going to just go ahead and paint my mirrors black and get rid of the texture appearance. Might as well not waste clear huh?
 
#14,414 ·
1/8 turn before full lock my drivers front tire rubs the inner fender liner. I'm thinking the alignment will fix that. Old guy at the gas station bought me a beer after talking to me about mustangs for 30 or so minutes. Feels good to have hard work complimented and appreciated!
 
Save
Like Like
#14,415 ·
spaseghost said:
1/8 turn before full lock my drivers front tire rubs the inner fender liner. I'm thinking the alignment will fix that. Old guy at the gas station bought me a beer after talking to me about mustangs for 30 or so minutes. Feels good to have hard work complimented and appreciated!
Click to expand...
What have you done to the front suspension? Likely just too big of tires.
 
Save
Like Like
#14,417 ·
Today i put in my spark plugs, and MSD wires. Got my vortech oil lines all hooked up and the s/c on with the belt. I dropped my driveshaft today, gonna drop the tranny tomorrow..Oh yeah and i test fit my hood..

Image


Image


Image
 
#14,419 ·
Mr. Red Pony said:
Depends on how good the mufflers are. If good quality, then yes.
Click to expand...
They are pretty much exact replicas of flowmasters. I have flowsound 2 chamber mufflers on the car now and they are still going strong after like 1.5 years. I am thinking that after i get back from the beach (Week of july 1st) i am going to have them welded in. how long you think it would take them to weld in those 2 mufflers because i don't really have another car...
 
14,401 - 14,420 of 19,030 Posts
Status
Not open for further replies.
You have insufficient privileges to reply here.
About this Discussion
19K Replies
342 Participants
Last post:
slonison
Modded Mustang Forums
posts
6.3M
members
83K
Since
2005
A forum community dedicated to all Ford Mustang owners and enthusiasts. Come join the discussion about performance, racing, builds, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
96 - 04 Modular Mustangs 5.0 Mustangs New Members Introductions Classic Mustangs