Always wondered how you were on a 3.20 with 9-10lbs and id make like 16lbs on that lol, headers aint no 6 lbs lol

 

i know man.. i just recently got to thinking about it since im going to be running that 2.8 RR pulley.

 

haha funny, i just talked to procharger today. he said theres no way you can have a 2.8" 8 rib pulley without it slipping (i have a 2.8 RR 8 rib). i think it will work but whatever.. and i also talked to him in length about bypass valves. he said a big red valve will stand a crazy amount of boost, like 25+ psi without worrying about it. i'm using two stock procharger bypasses right now with no problems so far, and he said the only thing i would have to worry about is compressor surge. he said it will sound like a turkey under the hood when i let off the gas if its surging. i'm gonna go with an enclosed big red valve and run a hose along my frame rail out the back with a filter on the far end. he said it won't be too restrictive, and he even knows a guy who put a lawn mower muffler on the end of his valve to quiet it down. so when its all said and done i'm gonna run a big red enclosed valve and about 20 psi.


oh btw, i got my car back together last night with the D1SC. the 2.8 is WAY too much pulley for now, it went to almost 20 psi at 5k rpm's, so i ordered a 3.4" from procharger.. $101 shipped so not too bad. i did a short 3rd gear run last night and it pulled harder than i've ever felt a car accelerate at 4k rpm's, but i didn't go too much past that cause it was running around 12.2:1 AF which is too lean

 

damn bob!!! nice bro! are you even tuned for that? or you just took off boosting without a tune for near 20 pounds?

 

He has a email tune from joe in his other thread he stated.

 

its not really tuned.. believe me i was watching the wideband and fuel pressure more than the road.. and my timing is pulled back so far it won't detonate.. plus from 2500-4500 rpm's in 3rd is about 3 seconds so its not like i was on it THAT long. lol

 

here is the proflo and its alot cheaper!

 

I have the proflow and it sounds really good and I'm only on 7lbs right now

 

That proflow is recirculated?

 

get the vortech mondo... you can find them for a good price used and they sound just like the big red

 

find me one slow. or post a link to one!

 

Is there any way i can get them to work with my powerdyne?