nope dont mess with it
its automatic
i dont care what no one says about setting voltage and such
thats a myth

 

What eddy said. If you're having to round out the mount holes to adjust it then its going out. Ours aren't the adjustable type if its a stock tps.

 

Okay thats good to know... I have seen some threads about adjustang it, but should I at least check to see if it is getting good voltage or anything? My car is coming to a stop and dying! I have changed the TPS, IAC, MAF, almost everything... As soon as the car gets hot it wants to die! Checked vaccum and fuel pressure both are great!

 

How do you set your base idle then?

 

base idle is set upon start up dude every time

 

Ford dealership wants to set my base idle? Do you know what they mean?

 

It means they are gonna charge you $95 to tighten random clamps in your engine bay and then say, "You're all set!"

 

yeah they route one of your coolant lines to your intake

 

Yah but they say that may be causing my stalling issue

 

This is what they are talking about >>>>>

Setting the Mustang TPS Voltage

 

Okay... Well thx guys I dnt know what to do with this car but im at that point of hatred towards it!

 

haha that would be great... Then I could just start all over lol

 

The TPS on our cars isn't adjustable. If it is out of range, your sensor is bad. Setting your base idle is a different story and you can do this yourself pretty easily. Here is a pretty simple write up.

http://paladinmicro.com/PalMFrame00.htm?wks=tba

 

I just hook up a scan tool and adjust the throttle stop till the tps voltage is ~ 1v(high end of specs for ct) and it cured my occasional stall issue

 

Why didn't you just have Joe fix your stalling issues in the tune?

 

OP- just try it,it works well if you tps voltage is in the lower range just do not try to set idle with it, just adjust screw for tps to read ~1V. which is still within specifications, the iac will control it just fine.

If you read above post that is what it is doing, raising base idle to higher end of specs

this is not intended to keep car idling, just for a stalling issue where rpms drop to low and iac does not react fast enough